• 1
  • 2
  • 3
  • 4

Covid-19 rapid test/mask/protective suit

      Steel pipes, Laser machinery, UAV 

    Water/gas treatment, Cooling water

Ice Water Bank for Peak Load Cooling
  • Clicks:3793
  • Classification: Products and Projects Water Cooling & Other
  • Brief description: Features: Constant water temperature below 0.5°C. Smaller refrigeration unit can meet peak loads requirements. Full stainless steel. Low refrigerant content, more environmentally friendly. Easy to maintain, open construction. Integrated modular desig
 [←]  Falling Film Ice Water Machine
 [→]  Pillow Plates for Heat / Cold Recovery

  • Features:

    Constant water temperature below 0.5°C.
    Smaller refrigeration unit can meet peak loads requirements.
    Full stainless steel.
    Low refrigerant content, more environmentally friendly.
    Easy to maintain, open construction.
    Integrated modular design, convenient transportation.


    An ice storage unit choose the size of refrigeration machines according to average loads.
    When the output reaches the peak load, it can still provide a large cooling capacity to meet the cooling demands.
    Use low electricity prices at night, in off peak electricity hours, when the energy is at a lower price, which usually is only half of the day cost.
    The plates freeze the water in the tank.
    During the day when the power is more expensive, the water cooler is turned off.
    The ice will melt into ice water.
    Storage of cooling capacity can be 
used for cooling your products.

    Specifications:

    Type Size Cooling capacity storage Pump power (kW)
    Insulation thickness(mm) L(mm) W(mm) H(mm) NW(kg) Volume(L) Ice storage(kg) kcal
    IB-1800 50 1400 2100 1700 700 3900 1800 147073 3
    IB-3200 2500 2100 1700 900 7200 3200 261463 4
    IB-6400 6000 2100 1700 900 17000 6400 522927 4
    Remarks:
    The ice water bank models corresponding refrigeration unit depend upon ice storage time and heat exchange to match.


    Working principle:

    Ice water bank is a package of evaporator plates upright in the water tank. The cooling media goes through inside of the heat exchange plates, absorbs heat of water from outside of evaporator, and lowers down the temperature of water to freezing point, evenly forming a layer of ice film up to 50mm on the plates (The ice film thickness depends on storage time).

    The ice film is stored statically in the water tank, so the water temperature in the water tank is extremely low, close to 0 °C. The air pipes of stainless steel are evenly arranged at the bottom of the tank. Starts up high pressure air blower, driving pressure air into stainless steel pipes, which provide intensive turbulence evenly melt ice on the evaporator to ensure a low temperature ice water.



Copyright All Rights Reserved @Shanghai Chemmah Industrial Co., Ltd.

Address: No. 528, Yanggao N. Rd, Pudong Dist, 200137, Shanghai, China

Email: sales@chemmah.com

Tel and WhatsApp: +86 158 6847 7948